Cooling fan, Removing the cooling fan – Dell PowerEdge T110 User Manual
Page 89
Installing System Components
89
14 Press
information matches the new system configuration. See "Entering the
System Setup Program" on page 36.
15 Run the system diagnostics to verify that the new processor operates
correctly. See "Running the Embedded System Diagnostics" on page 122
for information about running the diagnostics.
Cooling Fan
Your system has one cooling fan.
Removing the Cooling Fan
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System" on page 57.
3 Remove the expansion card stabilizer. See "Removing the Expansion Card
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on
5 Disconnect the fan’s power cable from the system board.
6 Pull the fan release tab and slide the fan out of the securing slots on the
chassis, and lift the fan out.
Mayzie_HOM.book Page 89 Monday, August 31, 2009 9:33 PM