Dell PowerEdge T110 - Manual (Page 40)

40
Using the System Setup Program and UEFI Boot Manager
SATA Settings Screen
Logical Processor
(Enabled default) On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Virtualization Technology
(Disabled default) Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Execute Disable
(Enabled default) Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(All default) If set to All, the maximum number of cores in each
processor is enabled.
C States
(Enabled default) When set to Enabled, the processor can operate in all
available power states.
Turbo Mode
(Enabled default) If Turbo Boost Technology is supported by the processor,
enables or disables Turbo Mode.
Processor 1 Family -
Model-Stepping Displays the family, model, level 2 cache size, level 3,
cache size, and number of cores of the processor.
Level 2 Cache Displays the amount of cache memory for the processor.
This option does not have user-selectable settings.
Number of Cores Displays the number of cores in the processor. This
option does not have user-selectable settings.
Option Description
SATA Controller
(AHCI default) Allows the embedded SATA to be set to Off, ATA, AHCI,
or RAID modes.
NOTE:
The UEFI support is disabled if SATA is set to the
RAID mode.
Option Description
Mayzie_HOM.book Page 40 Monday, August 31, 2009 9:33 PM