beautypg.com

Installing the front bezel, Removing front bezel insert, In figure 3-3 – Dell PowerEdge T110 User Manual

Page 60

background image

60

Installing System Components

Figure 3-3.

Removing and Installing the Front Bezel

Installing the Front Bezel

1 Align the tabs on the front bezel with the slots on the chassis.

See Figure 3-3.

2 Snap the bezel into place.

Removing Front Bezel

Insert

NOTE:

Before installing a drive in one or more of the front drive bays, remove the

corresponding insert(s) on the front bezel.

1 From the back of the bezel, push the tab on the end of the insert outward.
2 Pull the insert away from the bezel. See Figure 3-4.

1

drive release latch

2

front bezel

1

2

Mayzie_HOM.book Page 60 Monday, August 31, 2009 9:33 PM

See also other documents in the category Dell Computers: