Dell PowerEdge T110 - Manual (Page 26)

26
About Your System
No boot device
available.
Faulty or missing optical
drive subsystem, hard drive,
or hard-drive subsystem, or
no bootable USB key
installed. Use a bootable USB key, CD,
or hard drive. If the problem
persists, see "Troubleshooting
a USB Device" on page 106,
"Troubleshooting an Optical
Drive" on page 115, and
"Troubleshooting a Hard
Drive" on page 117. See "Using
the System Setup Program and
UEFI Boot Manager" on
page 35 for information on
setting the order of boot
devices.
No boot sector on
hard drive.
Incorrect configuration
settings in System Setup
program, or no operating
system on hard drive. Check the hard-drive
configuration settings in the
System Setup program. See
"Using the System Setup
Program and UEFI Boot
Manager" on page 35. If
necessary, install the operating
system on your hard drive. See
your operating system
documentation.
No timer tick
interrupt.
Faulty system board. See "Getting Help" on
page 129.
PCI BIOS failed
to install.
PCIe device BIOS (Option
ROM) checksum failure
detected during shadowing.
Cables to expansion card(s)
loose; faulty or improperly
installed expansion card(s).
Reseat the expansion card(s).
Ensure that all appropriate
cables are securely connected
to the expansion card(s). If the
problem persists, see
"Troubleshooting Expansion
Cards" on page 118.
PCIe Training
Error: Expected
Link Width is x ,
Actual Link Width
is y .
Faulty or improperly
installed PCIe card in the
specified slot. Reseat the PCIe card in the
specified slot number. See
"Troubleshooting Expansion
Cards" on page 118. If the
problem persists, see "Getting
Help" on page 129.
Message Causes Corrective Actions
Mayzie_HOM.book Page 26 Monday, August 31, 2009 9:33 PM