Embedded system management – Dell PowerEdge T110 User Manual
Page 53
Using the System Setup Program and UEFI Boot Manager
53
Deleting or Changing an Existing Setup Password
1 Enter the System Setup program and select the System Security.
2 Highlight Setup Password, press
window. Press
The setting changes to Not Enabled.
3 If you want to assign a new setup password, perform the steps in "Assigning
Embedded System Management
The USC is an embedded utility that enables systems and storage
management tasks from an embedded environment throughout the server’s
lifecycle.
The USC can be started during the boot sequence and can function
independent of the operating system.
NOTE:
Certain platform configurations may not support the full set of features
provided by USC.
The following features of USC are supported on systems with Baseboard
Management Controller (BMC):
•
Installing an operating system
•
Running diagnostics to validate the memory, I/O devices, processors,
physical disks, and other peripherals
For more information about setting up USC, configuring hardware and
firmware, and deploying the operating system, see the Unified Server
Configurator documentation on the Dell Support website at
support.dell.com/manuals.
Mayzie_HOM.book Page 53 Monday, August 31, 2009 9:33 PM