Dell Inspiron 6000 - Manual (Page 80)

80
Adding and Replacing Parts
3 Turn the computer over, loosen the captive screws on the memory module cover, and then remove the
memory module cover.
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the memory-module
securing clips.
4 If you are replacing a memory module, remove the existing module:
a Use your fingertips to carefully spread apart the securing clips on each end of the memory module
connector until the module pops up.
b Remove the module from the connector.
memory module
securing clips
(2 per connector)