Dell Inspiron 6000 - Manual (Page 24)

24
Setting Up Your Computer
4 In the next window, click the appropriate option:
• If you do not have an ISP and want to select one, click Choose from a list of Internet service
providers (ISPs).
• If you have already obtained setup information from your ISP but you did not receive a setup CD,
click Set up my connection manually.
• If you have a CD, click Use the CD I got from an ISP.
5 Click Next.
If you selected Set up my connection manually, continue to step 6. Otherwise, follow the instructions
on the screen to complete the setup.
NOTE:
If you do not know which type of connection to select, contact your ISP.
6 Click the appropriate option under How do you want to connect to the Internet?, and then click Next.
7 Use the setup information provided by your ISP to complete the setup.
If you are having problems connecting to the Internet, see "E-Mail, Modem, and Internet Problems" on
page 55. If you cannot connect to the Internet but have successfully connected in the past, the ISP might
have a service outage. Contact your ISP to check the service status, or try connecting again later.
Setting Up a Printer
NOTICE:
Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
• Obtain and install updated drivers.
• Connect the printer to the computer.
• Load paper and install the toner or ink cartridge.
• Contact the printer manufacturer for technical assistance.
Printer Cable
Your printer connects to your computer with a USB cable. Your printer may not come with a printer cable, so
if you purchase a cable separately, ensure that it is compatible with your printer. If you purchased a printer
cable at the same time you purchased your computer, the cable may arrive in the computer box.
Connecting a USB Printer
NOTE:
You can connect USB devices while the computer is turned on.
1 Complete the operating system setup if you have not already done so.
2 Install the printer driver if necessary. See the documentation that came with your printer.
3 Attach the USB printer cable to the USB connectors on the computer and the printer.
The USB connectors fit only one way.