Dell PowerEdge C6100 - Manual (Page 56)

56 Using the Baseboard Management Controller
ww
w
.
de
l
l
. co
m
|
s
u
pp
o
rt
. d
e
ll
. c
o
m
Set SSH/Telnet enable:
• Reserved extended configuration:
ipmitool 0x30 0x01
Response: 0x02 (Reservation ID)
• Enable SSH/Telnet:
ipmitool 0x30 0x03 0x02 0x04 0x01 0x00 0x00 0x00 0x01 0x00 (set
[3] SSH/Telnet to 0)
Response: 0x01
SSH/Telnet Enable and Disable
• Reserved extended configuration (NetFn: 30H CMD:01H)
• Set/Get extended configuration (NetFn: 30H CMD:03H/02H)
Table 1-60. Configuration ID = 03h, SOL
Attribute ID Size Description
Telnet/SSH
Redirect Enable
2 1 [0] — Disabled (default)
[1] — Enabled
Examples:
Get SSH/Telnet redirect enable status:
• Reserved extended configuration:
ipmitool 0x30 0x01
Response: 0x01 (Reservation ID)
• Get extended configuration:
ipmitool 0x30 0x02 0x01 0x03 0x02 0x00 0x00 0x00 0xFF
Response: 0x03 0x02 0x00 0x01 0x00 (SSH/Telnet SOL redirect disabled)
Set SSH/Telnet SOL redirect enable:
• Reserved extended configuration:
ipmitool 0x30 0x01
Response: 0x02 (Reservation ID)
• Enable SSH/Telnet SOL redirect:
ipmitool 0x30 0x03 0x02 0x03 0x02 0x00 0x00 0x00 0x01 0x01 (set 1
to enable)
Response: 0x01