Dell B5460dn Mono Laser Printer - Manual (Page 63)

Paper size 1 Dimensions Standard or
optional
550
‑sheet tray
Optional
2100
‑sheet tray
Multipurpose
feeder Duplex
Universal 105 x 148 mm to
216 x 356 mm
(4.13 x 5.83 in. to
8.5 x 14 in.)
X
70 x 127 mm to
216 x 356 mm
(2.76 x 5 to
8.5 x 14 in.) X X X
7 3/4 Envelope
(Monarch) 98 x 191 mm
(3.9 x 7.5 in.) X X
9 Envelope 98 x 225 mm
(3.9 x 8.9 in.) X X
10 Envelope 105 x 241 mm
(4.1 x 9.5 in.) X X
DL Envelope 110 x 220 mm
(4.3 x 8.7 in.) X X
C5 Envelope 162 x 229 mm
(6.38 x 9.01 in.) X X
B5 Envelope 176 x 250 mm
(6.93 x 9.84 in.) X X
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.) X X
1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes
that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact technical support.
2 Paper is supported in long
‑edge orientation.
Paper sizes, types, and weights supported by the output options
Supported paper sizes
Paper size 4
‑bin mailbox
High
‑capacity output
expander
Staple finisher Staple, hole punch
finisher
A6 X X
1 The finisher staples the paper if it is loaded long edge first.
2 The finisher stacks the paper but does not staple or punch holes in it.
3 The finisher stacks and staples the paper but does not punch holes in it.
4 The finisher staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.).
Paper and specialty media guide 63