Dell POWEREDGE 1950 - Manual (Page 47)

Installing System Components 47
4 Lift up on the latch on top of the system to guide it back and into an offset position. See Figure 3-3.
5 Grasp the cover on both sides and carefully lift the cover away from the system.
Figure 3-3. Removing the Cover
Closing the System
1 Lift up the latch on the cover.
2 Place the cover on top of the system and offset the cover slightly back so that it clears the chassis J hooks
and lays flat on the system chassis. See Figure 3-3.
3 Lower the cover into the closed position aligning it with the J hooks and push down on the latch to guide
the cover into place.
4 Rotate the latch release lock in a clockwise direction to secure the cover.
1 latch 2 latch release lock 3 alignment J hooks
4 chassis tabs
3
2
4
1