beautypg.com

Figure 6-1 for jumper lo, Ot the system. see figure 6-1 for – Dell POWEREDGE 1950 User Manual

Page 116

background image

116

Jumpers and Connectors

Figure 6-1.

System Board Jumpers

Table 6-1.

System Board Jumper Settings

Jumper

Setting

Description

1

PWRD_EN

(default)

The password feature is enabled.

The password feature is disabled.

2

NVRAM_CLR

(default)

The configuration settings are retained at system boot.

The configuration settings are cleared at the next system
boot. (If the configuration settings become corrupted to the
point where the system will not boot, install the jumper and
boot the system. Remove the jumper before restoring the
configuration information.)

NOTE:

For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 147.

See also other documents in the category Dell Hardware: