beautypg.com

Server module board connectors, Table a, For information about the dip switch designations – Dell POWEREDGE 1855 User Manual

Page 3: Lists the settings for the dip switch

background image

 

Table A-1. Server-Module DIP Switch Settings 

 

Server Module Board Connectors

See

Figure A

-3

and

Table A

-2

for the location and description of server module board connectors.

 

Figure A-3. Server Module Board Connectors

 

DIP Switch

 

Setting

 

Description

PASSWD
(Switch 1)

   (default)

The password feature is enabled when switch 1 is set to "on."

The password feature is disabled when switch 1 is set to "off."

NVRAM_CLR
(Switch 2)

   (default)

The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off."

The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on."

  "on"     

  "off"

See also other documents in the category Dell Computers: