Dell POWEREDGE 1855 User Manual
Page 15
provides information about the status indicators.
Table 2-2. Server Module Features and Indicators
Indicator
Icon
Activity
Indicator
Indicator Code
Server module power indicator
Off
Power is not available to the server module, the server module is not turned on, or the server
module is installed incorrectly. For detailed information on installing a server module, see
"
Server Modules
" in "Installing System Options."
Green
The module is turned on.
Green blinking
fast
The module power is on and there is a fault with the server module.
Green blinking
slowly
The module power is on and the server module is being remotely identified via the DRAC/MC.
Amber
The module power is off, but the system power is on.
Amber blinking
fast
The module power is off and there is a fault with the server module.
Server module power button
N/A
None
Turns server module power off and on.
l
If you turn off the module using the power button and the module is running an ACPI-
compliant operating system, the module can perform an orderly shutdown before the
power is turned off.
l
If the module is not running an ACPI-compliant operating system, power is turned off
immediately after the power button is pressed.
l
Press and hold the button to turn off the server module immediately.
The button is enabled in the System Setup program. When disabled, you can only use the
button to turn on the server module.
KVM selection indicator
Off
The server module is not selected by the KVM.
Green
The server module is selected for the KVM.
Amber blinking
The server module is not selected by the KVM and a power fault exists. See "
Troubleshooting
the Video Subsystem
," "
Troubleshooting the Keyboard
," "
Troubleshooting the Mouse
" in
"Troubleshooting Your System."
Green/amber
blinking
The server module is selected for the KVM and a power fault exists. See "
Troubleshooting the
Video Subsystem
," "
Troubleshooting the Keyboard
," "
Troubleshooting the Mouse
" in
"Troubleshooting Your System."
KVM selection button
N/A
None
Selects the server module for use with the KVM located on the back of the system. See "
Avocent Analog KVM Switch Module
" for information on selecting a server
module by using the keyboard.
Daughter card status indicator
(Infiniband card installed)
I/O
Off
Infiniband daughter card is not installed.
Green
Infiniband daughter card is installed, but no traffic is detected.
Green blinking
Infiniband daughter card is present and data transfers are occurring.
Daughter card status indicator
(Fibre channel daughter card
installed)
I/O
Off
Fibre channel daughter card is not installed.
Green
A link exists.
Green blinking
Fibre channel daughter-card data transfers are occurring.
Daughter card status indicator
(Gb Ethernet daughter card
installed)
I/O
Off
Gb Ethernet daughter card is not installed.
Green
A link exists.
Green blinking
Gb Ethernet daughter-card data transfers are occurring.