Dell B1163/W Multifunction Mono Laser Printer - Manual (Page 20)

Control panel overview
20 1. Introduction
12
Adjusting the control panel
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 17).
8
Stop/
Clear
Stops an operation at any time and there are more
functions.
• Cancels the current job.
• Prints configuration report: Press and hold this
button for about 2 seconds until the status LED blinks
slowly, and release.
• Supplied Information report: Press and hold this
button for about 6 seconds and release.
• Network configuration report b : Press and hold this
button for about 4 seconds until the status LED blinks
fast, and release.
9
+/- Buttons
Allows you to increase/decrease the number of pages to
copy. You can determine the number of copies (up to 99
copies) to copy by pressing the +/- buttons. The default
value is 1.
• If you press the +/- buttons, the number of copies will
increase/decrease by one.
• If you press and hold the +/- buttons, the number of
copies will increase/decrease by ten.
10
Start
Starts a job.
11
Status LED
Indicates the status of your machine (see
"Understanding the status LED" on page 68).
12
Toner LED
Shows the status of the toner (see "Understanding the
status LED" on page 68).
13 Display screen Shows the number of pages you want to copy.
a. B1163 only.
b. B1163w only.