beautypg.com

Settings and activity reports, User settings – Canon B160 User Manual

Page 90

background image

8-3

Selecting a menu

8

SETTINGS AND ACTIVITY REPORTS

USER SETTINGS

For details on accessing the settings below, see p. 8-2.

The default settings and selectable settings vary depending on the current country selection. The values
shown here are average values.

Name

Description

Settings

DATE & TIME

Set the date and time (24-hour clock) using the numeric buttons.

-

UNIT TELEPHONE #

Enter your fax number using the numeric buttons.

-

UNIT NAME

This is the name that appears at the top of each fax page you send.
(see p. 2-8)

-

TX TERMINAL ID

This option sets the parameters for the identification header that
appears on every page you send.

ON/OFF

TTI POSITION

Select the position of the TTI.
INSIDE IMAGE: Position the TTI inside the image area.
OUTSIDE IMAGE: Position the TTI outside the image area.

INSIDE IMAGE/

OUTSIDE IMAGE

TELEPHONE # MARK

Select the prefix for the telephone/fax number.

TEL/FAX

SCAN CONTRAST

Set the density of the reproduction. Set DARKER for light originals and
LIGHTER for dark originals.

STANDARD/DARKER/

LIGHTER

OFFHOOK ALARM

Enable/disable the off hook alarm. The alarm alerts you that the
optional handset is not seated properly in its cradle.

ON/OFF

VOLUME CONTROL

Set the volume of the fax sounds.

-

CALLING VOLUME

Set the volume of the ring produced when the fax detects a voice call
when Fax/Tel mode is set.

1/2/3

KEYPAD VOLUME

Set the volume of the keypad.

0 (off)/1/2/3

ALARM VOLUME

Set the volume of the error alarm sound.

0 (off)/1/2/3

LINE MONITOR VOL

Set the volume of the line monitor (sound during dialling).

0 (off)/1/2/3

RX CALL LEVEL

Set the ring tone.

STANDARD/HIGH

TEL LINE TYPE

Set the dialling method the fax uses to match the type of phone line
you have.

TOUCH TONE/

ROTARY PULSE

R-KEY SETTING

Set the type of line to which your fax is connected.

PSTN/PBX

PSTN

Your fax is connected directly to an outside line.

-

PBX:

ACCESS TYPE

ACCESS NUMBER

Your fax is connected through a PBX.
You can set the PBX type to PREFIX, HOOKING or EARTH
CONNECTION.
If you select PREFIX, you can enter an outside line access number of
up to 19 digits.

EARTH CONNECTION/

PREFIX/HOOKING

-

This manual is related to the following products: