Canon B160 - Manual (Page 130)

A-3
Optional handset
A
Options
Attaching the handset to your fax _____________________
Follow this procedure to attach the handset to your fax.
1 Use a ball point pen to remove the two
covers on the left side of the fax. 2 Remove the screws from the plugs and
insert the plugs into the holes on the
handset cradle. Then insert the plugs
(with the handset cradle) into the holes on
the fax.
• If you have difficulty inserting the plugs, turn the fax so
that the left side is facing you and the right side is
against a wall. This will allow you to insert the plugs
without the fax moving.
3 Use your finger to push the screws into
the plugs. 4 Place the handset in its cradle and
connect the line from the handset to the
h h jack.
• If you have difficulty, use a cross-point screwdriver to
push the screws all the way into the plugs. (Do not
screw them in as the screws may break.)