Canon B160 - Manual (Page 101)

8-14
Changing the access password________________
Follow the procedure below to change the access password.
6
Use [ u ] or [ d ] to select ON.
Press [Set].
7
Press [Stop].
Setting ends and the fax returns to standby mode.
1
Follow steps 1 to 3 on p. 8-13.
2
Press [Set].
PASSWORD appears on the LCD.
3
Enter the current four-digit access password using
the numeric buttons.
The password is not displayed as you enter it.
Press [Set] twice.
4
Enter a new four-digit access password using the
numeric buttons.
Press [Set].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
ON
Set
Stop
UN/LOCK PHONE
Set
PASSWORD _
PASSWORD
0 9
Set
PASSWORD
PASSWORD= 7777
0 9
Set
PASSWORD= 8888
Stop