Dell PowerEdge R300 - Manual (Page 156)

156
Running the System Diagnostics
• Test Iterations — Selects the number of times the test is run.
• Log output file pathname — When checked, enables you to specify the
diskette drive or USB memory key where the test log file is saved. You
cannot save the file to a hard drive.
Viewing Information and Results
The tabs in the Customize window provide information about the test and
the test results. The following tabs are available:
• Results — Displays the test that ran and the result.
• Errors — Displays any errors that occurred during the test.
• Help — Displays information about the currently selected device,
component, or test.
• Configuration — Displays basic configuration information about the
currently selected device.
• Parameters — If applicable, displays parameters that you can set for the
test.
book.book Page 156 Sunday, June 21, 2009 5:16 PM