Dell PowerVault MD3000 - Manual (Page 218)

218
Script Commands
Parameters
Stop Disk Group Blink
This command turns off the indicator LED on the physical disk that were
turned on by the start diskGroup blink command.
Syntax
stop diskGroup blink
Parameters
None.
Stop Enclosure Blink
This command turns off the indicator LED on the enclosure that were turned
on by the start enclosure blink command.
Syntax
stop enclosure blink
Parameters
None.
Stop iSCSI Session
This command forces the termination of an iSCSI session
Syntax
stop storageArray iscsiSession [ integer ]
Parameter Description
virtualDisk Name of the virtual disk for which to start the formatting. You
must put brackets ([ ]) around the virtual disk name. If the
virtual disk name has special characters, you must also put
quotation marks (" ") around the virtual disk name.