Dell PowerVault MD3000 - Manual (Page 199)

Script Commands
199
Syntax
show (physicalDiskChannel [(1 | 2 )] |
physicalDiskChannels [(1 | 2 ) ... (1n | 2n )] |
allPhysicalDiskChannels) stats
Parameters
Show Physical Disk Download Progress
This command returns the status of firmware downloads for the physical disks
targeted by the download physicalDisk firmware or download storageArray
physicalDiskFirmware commands.
Syntax
show allPhysicalDisks downloadProgress
Parameters
None.
NOTE:
When all firmware downloads have successfully completed, this command
returns a Successful status. If any firmware downloads fail, this command
shows the firmware download status of each targeted physical disk. This command
returns the status values shown in the following table.
Parameter Description
physicalDiskChannel Identifier number of the physical disk channel
for which to display information. Valid physical
disk channel values are 1 or 2. You must put
brackets ([ ]) around the physical disk channel
values.
Status Definition
Successful Downloads completed without errors.
Not Attempted Downloads did not start.
Partial Download Downloads are in progress.
Failed Downloads completed with errors.