Dell PowerEdge R310 - Manual (Page 23)

About Your System
23
Diagnostic Lights (Optional)
The four diagnostic indicator lights on the system front panel display error
codes during system startup. Table 1-1 lists the causes and possible corrective
actions associated with these codes. A highlighted circle indicates the light is
on; a non-highlighted circle indicates the light is off.
Table 1-1. Diagnostic Indicator Code
Code Causes Corrective Action
The system is in a normal
off condition or a possible
pre-BIOS failure has
occurred.
The diagnostic lights are
not lit after the system
successfully boots to the
operating system.
Plug the system into a working
electrical outlet and press the
power button.
The system is in a normal
operating condition after
POST. Information only.
BIOS checksum failure
detected; system is in
recovery mode. See "Getting Help" on page 169.
Possible processor failure. See "Troubleshooting the
Processor" on page 160.
Memory failure. See "Troubleshooting System
Memory" on page 153.
Possible expansion card
failure. See "Troubleshooting an
Expansion Card" on page 159.
Possible video failure. See "Getting Help" on page 169.
R310HOM.book Page 23 Thursday, March 4, 2010 1:03 AM