Dell Inspiron 8200 - Manual (Page 108)

108 Adding and Replacing Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
10 Insert the battery into the battery bay, or connect the AC adapter to
your computer and an electrical outlet.
11 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
Replacing the Hard Drive
NOTICE: To prevent data loss, turn off your computer (see page 42) before
removing the hard drive. Do not remove the hard drive while the computer is
on, in standby mode, or in hibernate mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage
the drive.
CAUTION: If you remove the hard drive from the computer when
the drive is hot, do not touch the metal housing of the hard drive.
CAUTION: Before working inside your computer, read the safety
instructions on page 9.
memory module cover
screw
1H018bk3.book Page 108 Monday, October 14, 2002 2:26 PM