Dell Dimension 5150/E510 - Manual (Page 74)

74
Removing and Installing Parts
6 Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
7 Before you close the card retention door, ensure that:
• The tops of all cards and filler brackets are flush with the alignment bar.
• The notch in the top of the card or filler bracket fits around the alignment guide.
fully seated
card
not fully seated
card
bracket caught
outside of slot
bracket within slot
alignment guide
alignment bar
alignment guide
alignment bar
card retention door
release tab
WD846bk2.book Page 74 Thursday, September 14, 2006 2:40 PM