Setting up and using your computer, Setting up a printer, Printer cable – Dell Dimension 5150/E510 User Manual
Page 13: Connecting a printer

Setting Up and Using Your Computer
13
Setting Up and Using Your Computer
Setting Up a Printer
NOTICE:
Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
•
Obtain and install updated drivers
•
Connect the printer to the computer
•
Load paper and install the toner or ink cartridge
•
Contact the printer manufacturer for technical assistance
Printer Cable
Your printer connects to your computer with a USB cable. Your printer may not come with a printer
cable, so if you purchase a cable separately, ensure that it is compatible with your printer. If you
purchased a printer cable at the same time you purchased your computer, the cable may arrive in the
computer box.
Connecting a Printer
NOTE:
You can connect USB devices while the computer is turned on.
1 Complete the operating system setup, if you have not already done so.
2 Install the printer driver if necessary. See the documentation that came with your printer.
3 Attach the USB printer cable to the USB connectors on the computer and the printer. The USB
connectors fit only one way.
WD846bk2.book Page 13 Thursday, September 14, 2006 2:40 PM