Dell PowerEdge M710HD - Manual (Page 305)

Installing Enclosure Components 305
Installing the Enclosure Control Panel
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Connect the LCD panel cable to the new control panel.
2 Connect the control panel cable to the underside of the new control panel.
3 Reinstall the control panel using the two screws.
4 Reinstall the bezel. See "Installing the Enclosure Bezel" on page 299.
5 Install the blades. See "Installing a Blade" on page 158.
LCD Module
Removing the LCD Module
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Rotate the LCD module so that the underside of the module faces
upward. See Figure 4-11.