Warning messages – Dell PowerEdge M710HD User Manual
Page 134
134
About Your System
Warning Messages
A warning message alerts you to a possible problem and prompts you to
respond before the system continues a task. For example, before you format a
diskette, a message warns you that you may lose all data on the diskette.
Warning messages usually interrupt the task and require you to respond by
typing y (yes) or n (no).
Warning: The
current memory
configuration is
not optimal. For
more information
on valid memory
configurations,
please see the
Hardware Owner’
Manual on the
technical support
site.
There is no memory
configuration error, but
the memory configuration
is not recommended by
Dell.
Unexpected
interrupt in
protected mode
Improperly seated DIMMs
or faulty keyboard/mouse
controller chip.
Reseat the memory
modules. See
problem persists, see
Write fault.
Write fault on
selected drive.
Faulty diskette, diskette
drive, or optical drive.
Replace the diskette. Ensure
that the drive cable is
properly connected. See
appropriate drive(s)
installed in your system.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
Glossary
at support.dell.com/manuals.
Table 1-27. Blade Messages
(continued)
Message
Causes
Corrective Actions