Dell PowerEdge M710HD User Manual
Page 107
About Your System
107
E141F CPU #
protocol
error. Power
cycle AC.
The system BIOS has
reported a processor
protocol error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E1420 CPU Bus
parity error.
Power cycle
AC.
The system BIOS has
reported a processor bus
parity error.
Remove AC power to the
system for 10 seconds or
clear the SEL.
If the problem persists,
E1422 CPU # machine
check error.
Power cycle
AC.
The system BIOS has
reported a machine check
error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
E1610 Power Supply
# (### W)
missing.
Check power
supply.
Specified power supply was
removed or is missing from
the system.
E1614 Power Supply
# (### W)
error. Check
power supply.
Specified power supply has
failed.
Table 1-26. LCD Status Messages
(continued)
Code
Text
Cause
Corrective Actions