Dell PowerEdge M710HD - Manual (Page 147)

Using the System Setup Program and UEFI Boot Manager 147
Power Management Screen (PowerEdge M915, M910, M710, M710HD,
M610 and M610x Only)
Failsafe Baud Rate
(115200 default)
Displays the failsafe baud rate used for console redirection
when the baud rate cannot be negotiated automatically
with the remote terminal.
Remote Terminal Type
(VT 100/VT 220
default)
Select either VT 100/VT 220 or ANSI.
Redirection After Boot
(Enabled default)
Enables or disables BIOS console redirection after your
system boots to the operating system.
Option Description
Power Management Options are OS Control, Active Power Controller,
Custom, or Maximum Performance.
If you select OS Control, Active Power Controller, or
Static Management Performance, the BIOS
preconfigures the remaining options on this screen. If you
select Custom, you can configure each option
independently.
CPU Power and
Performance
Management
Options are OS DBPM, System DBPM, Maximum
Performance, or Minimum Power.
Fan Power and
Performance
Management
Options are Maximum Performance or Minimum Power.
Memory Power and
Performance
Management
Options are Maximum Performance, a specified
frequency, or Minimum Performance.
Option Description