Dell PowerVault 124T - Manual (Page 6)

Installing the Autoloader: Dell PowerVault 124T DLT VS160 Autoloader User's Guide
file:///T|/htdocs/stor-sys/124T/en/124tvs16/install.html[12/5/2012 10:25:55 AM]
must conform to ANSI/AIM BC1 -1995 Uniform Symbology Specification Code 39. A set of bar code labels is initially included
with the autoloader. Refer to www.dell.com for information on obtaining additional bar code labels.
Product Overview
Front Panel Controls
1 Power switch
2 Media door (mailslot)
3 Front panel LEDs
4 Front panel LCD screen
5 Function keys
6 Left magazine
7 Right magazine (or blank)
Back Panel Overview
1 68-pin HD SCSI connectors
2 Fan vent
3 Power connector
4 Ethernet connector
5 Power switch
NOTE: If the cover must be taken off, there are 26 screws and 6 rail bolts that need to be removed. The cover should
be removed only by a qualified Dell Service Provider.