Cards – Dell Precision 390 User Manual
Page 86
3.
Gently slide the drive into place until the drive securely clicks into position.
4.
Connect the power cable to the drive, and connect the CD/DVD-drive cable to the drive and to the system board.
5.
Check all cable connections, and fold cables out of the way to avoid blocking the fan and cooling vents.
6.
7.
Replace the computer cover. See
8.
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
9.
Enter system setup (see
Entering System Setup
) and select the appropriate Drive option.
10.
Verify that your computer works correctly by running the Dell Diagnostics (see
Dell Diagnostics
).
Cards
Your Dell™ computer provides the following slots for PCI and PCI Express cards:
1 CD/DVD-drive cable
2 power cable
3 system-board CD/DVD-drive connector
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE:
Check the documentation for cards to ensure that you can accommodate them in your configuration. Some cards that require more physical space
and power (such as PCI Express graphics cards) may restrict the use of other cards.