Floppy drive or media card reader – Dell Precision 390 User Manual
Page 77

1.
On the inside of the drive panel, pinch the two drive-panel insert release tabs together and pull the insert out and to the right just enough to release it
from the drive panel.
2.
Set the drive-panel insert aside in a secure location.
Replacing a Drive-Panel Insert
1.
Place the drive-panel insert tab into the drive-panel slot.
2.
Pinch the drive-panel insert release tabs and press the drive panel insert into place.
3.
Ensure that the drive-panel insert is correctly seated in the drive panel.
Replacing the Drive Panel
1.
Align the drive-panel tabs with the side-door hinges.
2.
Rotate the drive panel toward the computer until it snaps into place on the front panel.
Floppy Drive or Media Card Reader
1 drive panel
2 drive-panel
insert
3 drive-panel insert release tabs
(2)
4 drive-panel insert tab in tab
slot
1
sliding plate
2
sliding-plate lever
3
drive panel
4
drive-panel tabs
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.