Switching drive orientations, Drive panel, Removing the drive panel (tower computer) – Dell Precision 390 User Manual
Page 108
Installing Drive-Panel Inserts in the Desktop Computer Drive Panel
1.
Place the drive-panel insert tab into the drive-panel slot.
2.
Pinch the drive-panel insert release tabs and press the drive panel insert into place.
3.
Ensure that the drive-panel insert is correctly seated in the drive panel.
Switching Drive Orientations
1.
If installed, remove the floppy drive by following the steps in
Removing a Floppy Drive or Media Card Reader (Tower Computer)
, and reinstall it by
following the steps in
Installing a Floppy Drive or Media Card Reader (Desktop Computer)
.
2.
If installed, remove optical drives by following the steps in
Removing a CD/DVD Drive (Tower Computer)
, and reinstall them by following the steps in
Installing a CD/DVD Drive (Desktop Computer)
.
Drive Panel
Removing the Drive Panel (Tower Computer)
1.
Slide the sliding-plate lever to the right, pivot the drive panel outward, and lift to remove the panel.
1 drive panel
2 drive-panel
insert
3 drive-panel insert release tabs
(2)
4 drive-panel insert tab in tab
slot
NOTE:
The tower computer supports one more 3.5-inch drive in the front than does the desktop computer.
NOTE:
For both tower computers and desktop computers, your drive panel may or may not have a slot for the IEEE 1394 connector.