Dell PowerEdge C2100 - Manual (Page 54)

50 Using the System Setup Program
Security Menu
Exit Menu
Option Description
Supervisor Password Displays whether the supervisor password is installed or not.
User Password
Displays whether the user password is installed or not.
Change Supervisor
Password/
Change User
Password
Use this option to install, change or clear the password.
If you select these items and press Enter, a dialog box appears
and then you can enter a password. You can enter no more than
six letters or numbers. Press Enter after you have typed in the
password. A second dialog box asks you to retype the password
for confirmation. Press Enter after you have retyped it correctly.
The password is required at boot time, or when the user enters
the Setup Utility.
User Access Level Set user access level to the setup utility.
Clear User Password Select to clear the user password.
Password Check
Set the password check mode.
Option Description
Save Changes and
Exit
Select to save any changes that you have made in the
Setup utility and exit the Setup utility.
Discard Changes
and Exit
Select to discard any changes that you have made in the
Setup utility and exit the Setup utility.
Discard Changes Select to discard any changes you have made without leaving
the Setup utility.
Load Optimal
Defaults
Select to install optimal settings for all the items in
the Setup utility.
Load 2nd Defaults Select to install 2nd default values from GPNV for all the items
in the Setup utility.
Save 2nd Defaults Select to save all the setup questions to GPNV as 2nd default
values.
book.book Page 50 Friday, November 8, 2013 11:29 AM