Dell PowerEdge C2100 - Manual (Page 46)

42 Using the System Setup Program
Memory Configuration
IDE Configuration
NUMA Support
(Disabled default)
When Enabled, executes software for NUMA aware OS.
When Disabled, allows better memory access
performance for non-NUMA OS.
Option Description
Current Memory
Frequency
Displays the current memory frequency.
Memory Turbo Mode
(Disabled default)
Enables/disables the memory turbo mode.
Memory Frequency
(Auto default)
Forces a DDR3 frequency slower than the common tck
detected using SPD.
Memory Mode
(Independent default)
Selects the memory mode.
Throttling - Closed Loop
(Enabled default)
Enables BIOS to program Closed Loop throttling for
memory components.
Throttling - Open Loop
(Enabled default)
Enables BIOS to program Open Loop throttling for
memory components.
Option Description
SATA Configuration
(Enhanced default)
Configures the SATA.
Configure SATA#1 as
(IDE default)
Configures the SATA#1.
• IDE
• AHCI
• RAID
Hard Disk Write Protect
(Disabled default)
Enables or disables device write protection. This is
effective only if the device is accessed through BIOS.
IDE Detect Time Out
(Sec)
Selects the time out value for detecting ATA/ATAPI
device(s).
Option Description
book.book Page 42 Friday, November 8, 2013 11:29 AM