Dell XPS 14 (L401X, Late 2010) - Manual (Page 38)

38 Palm-Rest Assembly
11 Lift the connector latch and pull the pull-tab to disconnect the touch-pad
cable from the system-board connector.
12 Disconnect the control-strip cable from the system-board connector.
CAUTION: Carefully separate the palm-rest assembly from the computer base to
avoid damage to the palm-rest assembly.
13 Lift the palm-rest assembly off the computer base.
Replacing the Palm-Rest Assembly
1 Follow the instructions in "Before You Begin" on page 9.
1 control-strip cable 2 top cover
3 tabs (3) 4 palm-rest assembly
5 pull tab 6 touch-pad cable connector
1
3
5
4
6
2