beautypg.com

Memory module(s), Removing the memory module(s) – Dell XPS 14 (L401X, Late 2010) User Manual

Page 15

background image

Memory Module(s)

15

3

Memory Module(s)

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 13) before working inside the computer.

You can increase your computer memory by installing memory modules on

the system board. See "Specifications" in the Setup Guide that shipped with

your computer or at support.dell.com/manuals for information on the type of

memory supported by your computer.

NOTE:

Memory modules purchased from Dell are covered under your computer

warranty.

Your computer has two user-accessible SODIMM connectors.

Removing the Memory Module(s)

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery (see "Removing the Battery" on page 13).
3 Loosen the two captive screws that secure the memory-module cover to

the base cover.

4 Use your fingertips to pry out the memory-module cover and lift it off the

base cover.