Dell 962 All In One Photo Printer - Manual (Page 55)

Using the Printer 55
Connecting to a computer modem
1 Connect a phone cord from the LINE connector ( - right side connector) on the printer
to the telephone wall jack.
2 Remove the protective plug from the PHONE jack connector ( - left side connector) on
the back of the printer.
3 Connect a phone cord from the telephone to the computer modem.
4 Connect a phone cord from the computer modem to the PHONE jack connector ( - left
side connector) on the printer.
Faxing Using the Printer Operator Panel
What if I Have a Digital Subscriber Line (DSL)?
DSL delivers digital data to a computer through a telephone line. Your Dell Photo AIO Printer
962 is designed to work with analog data. If you are faxing over a telephone line connected to a
DSL modem, install a DSL filter to avoid interference with the analog fax modem signal.
1 Connect the DSL filter to an active telephone line.
2 Connect the printer directly to the output of the DSL filter.
NOTE: Do not install any splitters between the DSL filter and the printer. Contact your DSL service
provider if you need more help.