Replacing the speakers – Dell XPS M140 (MXC051, Late 2005) User Manual
Page 63
Speakers: Dell™ XPS M140 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/speakers.htm[2/21/2014 11:34:04 AM]
1 speakers (2)
3 speaker cable
5 guide post slots (4)
2 M2.5 x 5-mm screws (3)
4 speaker connector
Replacing the Speakers
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as the back panel) on the computer.
1. Follow the instructions in
Preparing to Work Inside the Computer
2. Follow the instructions in
NOTICE: Exercise care when handling or replacing the speakers.
3. Place each of the new speakers in the appropriate speaker slot.
NOTE: For proper placement, align the slots on the speakers with the screw-hole guide posts on the base of the
computer.
4. Replace the three M2.5 x 5-mm screws to secure the speakers to the base of the computer.
5. Connect the speaker cable to the system board.
6. Replace the palmrest (see
7. Replace the microprocessor thermal-cooling assembly (see