Dell PowerEdge T100 - Manual (Page 36)

36
Using the System Setup Program
Console Redirection Screen
Table 2-7 lists the options and descriptions for the information fields that
appear on the Console Redirection screen.
System Security Screen
Table 2-8 lists the options and descriptions for the information fields that
appear on the System Security screen.
NOTE:
The Trusted Platform Module (TPM) may not be available in some countries.
Table 2-7. Console Redirection Screen Options
Option Description
Console Redirection
(Off default) Sets the console redirection feature to Off or Serial Port 1.
Failsafe Baud Rate
(
115200 default)
Displays if the failsafe baud rate is used for console
redirection.
Remote Terminal Type
(VT 100/VT 220 default) Select either VT 100/VT 220 or ANSI.
Redirection After Boot
(Enabled default) Enables or disables console redirection after your system
restarts.
Table 2-8. System Security Screen Options
Option Description
System Password Displays the current status of your system's password security
feature and allows you to assign and verify a new system
password.
NOTE:
See "Using the System Password" on page 39 for
instructions on assigning a system password and using or
changing an existing system password.
Setup Password Restricts access to the System Setup program in the same way
that you restrict access to your system using the system password
feature.
NOTE:
See "Using the Setup Password" on page 42 for instructions
on assigning a setup password and using or changing an existing
setup password.
book.book Page 36 Wednesday, June 24, 2009 8:21 AM