Dell PowerEdge T100 - Manual (Page 21)

About Your System
21
Keyboard fuse has
failed.
Keyboard fuse has failed. Replace the keyboard.
Faulty system board. If the problem persists, the
system board is faulty. See
"Getting Help" on
page 141.
Manufacturing mode
detected
System is incorrectly
configured.
Memory address line
failure at address ,
read value
expecting value
Memory double word
logic failure at
address , read value
expecting value
Memory odd/even
logic failure at
start address to
end address
Memory write/read
failure at address ,
read value
expecting value
Faulty or improperly
installed memory modules,
or faulty system board. Ensure that all memory
modules are properly
installed. See
"Troubleshooting System
Memory" on page 118. If
the problem persists, see
"Getting Help" on
page 141.
Memory tests
terminated by
keystroke
The spacebar was pressed
during POST to terminate
the memory test. Information only.
Table 1-6. System Messages (continued)
Message Causes Corrective Actions
book.book Page 21 Wednesday, June 24, 2009 8:21 AM