Dell PowerVault DP500 - Manual (Page 13)

Configuring Your System for the First Time
13
9 Configure additional default gateways, if required. Otherwise, go to step 10.
a On the IP Settings tab under Default gateways, click Add.
b Under TCP/IP Gateway Address in the Gateway field, type the
IP address of the default gateway.
c To manually configure a default route metric, clear the Automatic
metric check box and type a metric in the Metric field.
d Click Add.
e Repeat step b through step d for each default gateway (if required).
10 Configure a custom metric for this connection, if required. Otherwise, go
to step 11.
a Clear the Automatic metric check box.
b In the Interface metric field, type the appropriate metric.
11 Click OK.
Configuring Your System Using a Keyboard,
Monitor, and Mouse
NOTE:
Depending on your method of configuration, local keyboard, video, mouse
switch (KVM) connections may be required to complete the installation and
configuration procedures. If your remote system can complete the configuration
procedures, local KVM connections are not required for operation.
1 Connect a keyboard, monitor, and mouse to the storage server.
For information about system connectors, see your system’s User’s Guide.
2 Turn on the storage server.
3 Log in to the storage server.
NOTE:
The default administrative user name is administrator and the
default password is storageserver .