Dell UPS 10000R User Manual

Page 75

UPS Maintenance

Figure 42. Installing the Battery Trays

Connect the internal battery connectors (see Figure 43):

Connect the left battery tray connector to the UPS battery connector. Connect the right battery

tray connector to the UPS battery connector.

NOTE:

A small amount of arcing may occur when connecting the batteries. This is normal and does not damage

the unit or present any safety concerns.

Locate and connect the battery jumpers located on either side of the center post. Place the

connectors on the small shelf at the top of the center post.

NOTE:

Connecting the center battery jumpers connects the two battery trays serially.

Figure 43. Connecting the Battery Connectors