Dell UPS 10000R - Manual (Page 46)

46 |
Operation
Measurements
The measurements screens provide useful measurement information on:
S Output watts, VA, current, power factor, voltage, and frequency
S Input voltage and frequency
S Battery voltage, percentage charged, and time remaining
S Instantaneous Headroom Watts remaining
S Peak Headroom Watts (the remaining watts available to support the load at peak demand,
includes the date and timestamp of the peak demand)
S Peak Consumption Watts (the peak power demand on the UPS, includes the date and timestamp
of the peak demand)
S Present kWh Consumption (the kWh demand on the UPS averaged over the past hour)
S Cumulative kWh Consumption (the total kWh usage, includes the date and timestamp since it
was last reset)
S DC bus voltages (measured internal bus voltages for double conversion)
NOTE: For Peak Consumption Watts and Cumulative kWh Consumption, input level is not supported.