Dell Acceleration Appliances for Databases - Manual (Page 32)

Changing the Management IP Address
1. Ensure that both nodes are up.
2. In the CLI, run
system:setup cluster
to display the Setup dialog for cluster
configuration.
3. Change the management IP address in the dialog.
4. Select OK and press Enter. The node with the cluster IP address will fail over to the other
node.
Changing the ION Accelerator Cluster Name or Cluster IP Address
1. Ensure that both nodes are up.
2. In the CLI, run
system:setup cluster
to display the Setup dialog for cluster configuration.
3. Change the cluster name in the dialog.
4. Select OK and press Enter.
Changing the Gateway IP Address
1. Ensure that both nodes are up.
2. In the CLI, run
system:setup lan
to display the Setup dialog for LAN configuration.
3. Click the Routing tab in the dialog.
4. Change the gateway IP address.
5. Select OK and press Enter.
Changing the IP Addresses for Cluster Interconnect Ports
You can change interconnect ports only when no cluster resources are configured.
1. Ensure that both nodes are up.
2. In the CLI, run
system:setup lan
to display the Setup dialog for LAN configuration.
3. Change the cluster interconnect IP address in the dialog.
4. Select OK and press Enter.
5. Restart both nodes.
Changing the iSCSI Port IP Address
1. Ensure that both nodes are up.
2. In the CLI, run
system:setup lan
to display the Setup dialog for LAN configuration.
25