Dell Acceleration Appliances for Databases - Manual (Page 26)

ENABLING THE HA CLUSTER
If you are using the HA feature, the Enable Cluster screen appears, as shown below. (If you are not
using HA, skip ahead to Password Setup below).
1. Enter the cluster name and cluster IP address in the Cluster Information fields.
Do not choose the name or IP address of one of the currently existing nodes. Also, the
cluster name must be a DNS entry, not DHCP, and must be on the same subnet as the
management IP address for the ION Accelerator nodes.
2. In the Primary Channel area, tab to the drop-down arrow (circled above) corresponding to
the Bind Network Address.
19