Dell Acceleration Appliances for Databases - Manual (Page 13)

For standalone mode, ION Accelerator supports Fibre Channel and iSCSI protocols; however,
only one of these protocols can be running at a time. For example, if a QLogic and a Mellanox
card are installed in the same appliance, the standalone install of ION Accelerator will fail to
recognize one of the two cards and will not display that card in the GUI.
1. Select OK to proceed. The Storage protocol dialog appears, with the detected protocol
displayed as the default.
2. Select the storage protocol you want to use with ION Accelerator, and then select OK.
The High Availability dialog appears, with the default determined by whether HA
hardware was detected:
3. Select Enable if you want to enable HA mode (requires the ION Accelerator HA option), or
Disable to use standalone mode, and then select OK.
6