Dell Acceleration Appliances for Databases - Manual (Page 22)

VERIFYING THE NETWORK SETTINGS
With your configuration choice completed (default DHCP, modified DHCP, or static IP address), the
Network Settings screen shows your device for verification.
1. Review the settings (circled below) and select OK to finish Network Configuration.
Saving the Network Configuration
A summary screen appears, listing the settings for the HA nodes (both
eth4
and
eth5
are
configured in this example):
2. Select OK to save the configuration. A progress bar appears, and each completed configuration
task is listed. At the end of the save process, the appliance is automatically synchronized with the
NTP server, as shown below.
15