Dell Acceleration Appliances for Databases - Manual (Page 62)

Creating RHEL Initiators in ION Accelerator
1. From ION Accelerator (standalone or HA), create an initiator group in the CLI:
inigroup:create RHEL
Id RHEL
Parent
Initiators []
UUID 29f1007e-1751-11e3-8482-0015178fbc10
2. For each target, create an initiator. The examples below are for four iSCSI targets from ION
Accelerator HA:
initiator:create -a RHEL iqn.1994-
05.com.redhat:595862111da4#192.168.10.8 rhel_1
id rhel_1
UUID iqn.1994-05.com.redhat:595862111da4#192.168.10.8
Protocol iSCSI
Discovered false
Initiator Group 29f1007e-1751-11e3-8482-0015178fbc10
initiator:create -a RHEL iqn.1994-
05.com.redhat:595862111da4#192.168.11.8 rhel_2
id rhel_2
UUID iqn.1994-05.com.redhat:595862111da4#192.168.11.8
Protocol iSCSI
Discovered false
Initiator Group 29f1007e-1751-11e3-8482-0015178fbc10
initiator:create -a RHEL iqn.1994-
05.com.redhat:595862111da4#192.168.10.9 rhel_3
id rhel_3
UUID iqn.1994-05.com.redhat:595862111da4#192.168.10.9
Protocol iSCSI
Discovered false
Initiator Group 29f1007e-1751-11e3-8482-0015178fbc10
initiator:create -a RHEL iqn.1994-
05.com.redhat:595862111da4#192.168.11.9 rhel_4
id rhel_4
UUID iqn.1994-05.com.redhat:595862111da4#192.168.11.9
Protocol iSCSI
Discovered false
55