Dell C1760NW Color Laser Printer - Manual (Page 35)

Connecting Your Printer 33
Manual SSID Setup
NOTE: A Password is required to enter Admin Menu when Panel Lock Set is set to Enable . In this case, enter
the password you specified, and press the (Set) button.
1 Press the (Menu) button.
2 Press the button until Admin Menu appears, and then press the (Set) button.
3 Press the button until Network appears, and then press the (Set) button.
4 Press the button until Wireless Setup appears, and then press the (Set) button.
5 Press the button until Manual Setup appears, and then press the (Set) button.
6 Enter the SSID, and then press the (Set) button.
7 Select the network mode from Infrastructure and Ad-hoc depending on your environment, and then press
the (Set) button.
If you select Infrastructure, proceed to step 8.
If you select Ad-hoc, proceed to step 9.
8 Select the encryption type from No Security, Mixed mode PSK, WEP, WPA-PSK-TKIP, or WPA2-PSK-
AES.
If you do not set security for your wireless network:
• Press the
button until No Security appears, and then press the (Set) button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a Press the button until Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES appears, and then
press the (Set) button.
b Enter the passphrase, and then press the (Set) button.
NOTE: A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
a Press the button until WEP appears, and then press the (Set) button.
b Enter the WEP key, and then press the (Set) button.
c Press the button to highlight the desired transmit key from Auto or WEP Key 1 to WEP Key 4, and
then press the (Set) button.
Proceed to step 10.
9 Select the encryption type from No Security or WEP.
If you do not set security for your wireless network:
• Ensure that No Security appears, and then press the (Set) button.
To use WEP encryption:
a Press the button until WEP appears, and then press the (Set) button.
b Enter the WEP key, and then press the (Set) button.
c Press the button to highlight the desired transmit key from WEP Key 1 to WEP Key 4, and then press
the (Set) button.