Microphone, Removing the microphone, Replacing the microphone – Dell Inspiron 1464 (Early 2010) User Manual
Page 37
Back to Contents Page
Microphone
Dell™ Inspiron™ 1464 Service Manual
Removing the Microphone
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the optical drive (see
Removing the Optical Drive
).
4.
Remove the module cover (see
Removing the Module Cover
).
5.
Remove the power button panel (see
Removing the Power Button Panel
).
6.
Remove the keyboard (see
Removing the Keyboard
).
7.
Remove the palm rest (see
Removing the Palm Rest
).
8.
Disconnect the microphone cable from the connector on the system board.
9.
Gently slide and lift the microphone out of the slot in the computer base.
Replacing the Microphone
1.
Follow the procedures in
Before You Begin
.
2.
Slide the microphone into the slot in the computer base.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
microphone cable
2
microphone
3
connector on the system board